Click Springs: Fixing Dead Bezels
Author: Funny Items
Release time: 2026-08-25 19:05:21
View number: 8
Inside the Click Mechanism
Every bezel click comes from a spring-and-ball (or leaf) mechanism beneath the bezel. When clicks go wrong, this tiny part is usually the culprit.
How It Works
- A small spring-loaded ball or leaf presses into notches machined under the bezel
- Each notch = one click; 60 or 120 depending on design — see our click feel guide
Click Problems and Causes
| Symptom | Likely Cause | Fix |
|---|---|---|
| No clicks at all | Ball/spring fell out during previous removal | Retrieve and reseat, or new spring kit |
| Intermittent clicks | Debris in the detent track | Clean track, fresh gasket grease |
| Weak clicks one direction | Spring fatigue | Replace the spring — cheap part |
| Grinding rotation | Grit under bezel | Remove, clean everything, reassemble |
Service Notes
- Remove bezel per our safe removal guide
- Note the ball/spring orientation before lifting — photos save reassembly guessing
- Clean old grease; apply tiny amount of silicone grease to the track
Frequently Asked Questions
Lost the ball during disassembly?
Universal bezel ball kits cost a few dollars — match diameter approximately; tolerance is forgiving.