Box to Wrist: The Master Workflow

From Box to Wrist: The Full Workflow

Your parts have arrived. Here is the complete workflow from unboxing to first wear — condensed into one page.

Phase 1: Inventory (30 min)

• Unbox and verify every part against your order — see our compatibility checklist
• Log each item in your inventory system (see our organization guide)

Phase 2: Dry Fit (1 hour)

1. Open the case — see our opening methods
2. Seat the movement in its ring — see our ring guide
3. Test-fit the dial using the "frames a number" check — see our alignment guide

Phase 3: Assembly (2–3 hours)

1. Mount dial (feet or dots)
2. Press hands at true 12:00 — hour, minute, second (see our hands guide)
3. Run the five tests — see our testing checklist
4. Install fresh gaskets, close the case

Phase 4: Finish (1 hour)

• Fit bezel and insert — see our insert guide
• Attach strap — spring bar basics in our spring bar guide
• Set time, wind fully, wear it

Frequently Asked Questions

Total realistic time for first build?
An unhurried afternoon. Experienced builders finish this scope in under two hours.