Failed Builds: The Rescue Manual

Rescuing Failed Builds

Your build has a problem. Here are rescue paths for the five most common failures.

Failure 1: Hands Rubbing Dial/Crystal

1. Identify which hand contacts what — close one eye, rotate slowly, watch contact points
2. Wrong height hands? Swap to correct grade set — see our stack guide
3. Bent hand? Careful straightening with tweezers works for minor bends; replacement for severe ones

Failure 2: Movement Won't Seat in Case

• Stem too long bottoming out — trim per our measuring guide
• Movement ring wrong size — verify against case specs (ring guide)
• Date wheel contacting caseback posts — check dial spacer orientation

Failure 3: Crown Won't Set Date/Time

• Stem not engaged in movement — press release button while reinserting
• Keyless works damaged from forcing — professional repair territory

Failure 4: Water Inside After Swimming

1. Stop wearing immediately; open case back
2. Dry everything thoroughly — see our drying guide
3. Identify entry point: gaskets almost always — replace before resealing
4. Professional cleaning if movement was wet beyond surface moisture

Failure 5: Bezel Fell Off Entirely

• Bezel gasket lost or degraded — new gasket restores retention (see click spring guide)

Prevention habits that avoid all five: our five checks protocol.

Frequently Asked Questions

Multiple failures at once — start where?
Water intrusion first (movement survival), then mechanical issues. Everything else waits.